If your motorcycle is equipped with accessories that require extra time to remove and replace, an hourly rate of $60.00/hour will be charged to perform this work.
Click category below to see our current pricing.
|
Our prices do not reflect Indiana Sales tax of
7%. Tax is on parts only. |
|
| HONDA GOLDWING | |
| Parts Prices A la carte: | |
| AK20 Cartridge Kit/Adjustable Spring Preload/Rebound Caps | $1,250.00 |
| AK20 Cartridge Kit & Trike Adjustable Rebound Caps | $1,175.00 |
| AK20 Cartridge Kit & Rebound Adjustable Caps | $1,100.00 |
| Traxxion Spring Kit | $125.00 |
| Traxxion Triple Clamp & Top Plate (Includes Tapered Bearings) | $750.00 |
| Traxxion Triple Clamp (2 in stock) (Includes Tapered Bearings) | $600.00 |
| Traxxion Rear Shock, Spring, & Braided Hose | $550.00 |
| Traxxion Fork Brace & Tube guards | $300.00 |
| Tapered Bearing Kit | $45.00 |
| Two Inner Bushings | $20.00 |
| Two Outer Bushings | $20.00 |
| Two Fork Seal Kits | $50.00 |
| BACK TO TOP | |
|
LABOR CHARGES FOR THE GL1800 GOLDWING: |
|
|
Remove & Install Front Forks |
$100.00 |
|
Install AK20 Cartridge Kit, Springs, Bushings, Seals |
$150.00 |
|
Install & Service Rear Shock + Bleed
Hydraulic Preload |
$250.00 |
|
Install Tapered Bearings or Triple Clamp w/ AK20 kit Install |
$150.00 |
|
Install Triple Clamp & Top Plate While Installing AK20 kit |
$200.00 |
|
Install Fork Brace |
FREE |
| ** Your Hydraulic Preload Adjuster Will Be Broken Down & Inspected For Leakage. If Your Unit Is Found Defective You Will Be Charged $150.00 For A Reconditioned Unit. | |
| HARLEY DAVIDSON | |
| RETAIL PRICES FOR A COMPLETE INSTALL | |
|
AK20 Cartridge Kit & Adjustable Rebound Caps |
$1150.00 |
| Bitubo Rear Shocks | $700.00 |
| Two Inner Bushings | $30.00 |
| Two Outer Bushings | $30.00 |
| Two Fork Seals | $50.00 |
| BACK TO TOP | |
| LABOR CHARGES FOR HARLEY DAVIDSON | |
| Remove & Install Front Forks | $150.00 |
| Install AK20 Cartridge Kit, Springs, Bushings, Seals | $200.00 |
| Install Rear Shock | $85.00 |
| BACK TO TOP | |
| OTHER MAKES | |
| RETAIL PRICING FOR OTHER MAKES AND MODELS: | |
|
Due to the sheer number of makes and models of motorcycles, it is not
possible for Midwest Custom Cycle Work, LLC to list all pricing. If you would like Midwest Custom Cycle Work, LLC to work on your bike, but you do not see it listed on this page, please contact Paul Bihm at (812)-455-6618, or email us via our "CONTACT" page. |
|
| BACK TO TOP | |